Internal pelmet:
The internal pelmet is an engineered steelwork ladder system that is a structure of a framework relying only on the roof for support then plasterboard is screw fixed.

• Can be used from 5 – 40 degrees
• Steelwork ladder system extends from 300mm to 1200mm
• So much warmer than a basic conservatory for up to 40% lower heating costs
• Datum point is internal side frame to external face of 12.5mm plasterboard.
• Can be used with standard eaves or super duty version with box gutters & bolsters and accommodates differential pitches across hips.
• If your chosen design features a box gutter, we suggest you use a 30mm frame packer, which allows the plasterboard to run underneath the box gutter for a neater finish.
• This is a systemised approach, yet maintains flexibility for the retailer
• Steel ladder framework and roof are integrated into Wendland’s software, the additional weight and specs of roof according to postcode and loading.
• Allow completion of the glazed roof externally and internally before steelwork ladder system is installed/li>
• Steelwork ladder system is supplied on the same lead time as the roof.
• Orangery style internal pelmet is the perfect place for spotlights, speakers and cable runs.

Gutter cover:
The gutter cover is assembled from three sections to add a further degree of style. The gutter cover shrouds the gutter hiding the ends of the glazing bars to give a new look at the eaves interface.

• Gutter cover can be used to give a new look to the exterior at the eaves.
• It can be used with standard eaves beam or with the super duty eaves beam.
• Gutter cover for 135 and 90 degree corners are now featured as standard.
• Makes the roof/frames interface tidier hiding the appearance of glazing bar end caps, gutter/brackets and the ends of the glazing panels.
• Perfectly complements the colour of the windows and doors.
• Integrates fully with the design of your choice, no matter what the style of windows and doors e.g. bi-folds.